Quik-Park loader mounting system

The H-Series Loaders are designed for easy removal and mounting to and from the tractor without tools.

The parking stand, attached to the front frame of the tractor, is an integral part of the loader during loader operation.

The parking stand lowers into position by moving the joystick to the raised position once the latches are opened. This allows the loader to move to the parked position.

Quik-change attachment carrier

Allows fast, easy removal/mounting of attachments without tools.

Close up of grease fitting

Pivot point grease fitting locations

All pivot points on the loader have grease fittings that are accessible from the side of the loader to make greasing the loader much easier, ensuring that all grease points are more likely to be serviced. No more searching for grease points that are hard to find. Removing the grease gun from the grease fitting or zerk is not a problem either as sufficient radius has been left to allow the grease gun tip to be rotated to the side for removal from the fitting or zerk.

Maximum lift height (A)

2616 mm
103.3 in.

Lift capacity at full height

Measured at pivot (U)
633 kgf
1393 lbf
Measured at 500 mm ahead of pivot (V)
457 kgf
1005 lbf

Boom breakout force

Measured at pivot (Y)
1710 kgf
3769 lbf
Measured at 500 mm ahead of pivot (Z)
1209 kgf
2665 lbf

Bucket rollback force capacity

At ground-level line (ZZ)
1335.4 kgf
2944 lbf

Clearance at full height - bucket dumped (C)

2003 kgf
78.8 lbf

Dump angle, degrees (E)

49.3 degree (angle)

Rollback angle, degrees (G)

23.8 degree (angle)

Model

4105

Front tire

10-16.5 6PR R4T1

Rear tire

17.52-24 8PR R4T1

Front axle configuration

Wheelbase

1727 mm
68 in.

Pump capacity

5.7 gpm

Rated pressure

2500 psi

Base weight

281.09 kg

Leveling configuration

Bucket used

Materials

Bucket weight

93.8 kg
207 lb

Lift capacity at full height

Measured at pivot (U)
633 kgf
1393 lbf
Measured at 500 mm ahead of pivot (V)
457 kgf
1005 lbf

Lift capacity at 59 in. (1500 mm)

Measured at pivot (W)
959 kgf
2109 lbf
Measured at 500 mm ahead of pivot (X)
745 kgf
1639 lbf

Boom breakout force

Measured at pivot (Y)
1710 kgf
3769 lbf
Measured at 500 mm ahead of pivot (Z)
1209 kgf
2665 lbf

Bucket rollback force capacity

At maximum height (VV)
822 kgf
1819 lbf
At 59-in. (1500-mm) lift height (XX)
1397 kgf
3079 lbf
At ground-level line (ZZ)
1335.4 kgf
2944 lbf

Dimensions

Maximum lift height (A)
2616 mm
103.3 in.
At full height - bucket level(B)
2411 mm
94.9 in.
At full height - bucket dumped (C)
2003 mm
78.8 in.

Overall length (I+F), ft (m)

3.218 m
10.55 ft

Overall height in carry position (J)

Digging depth (H)

121 mm
4.76 in.

Reach

At maximum height (D)
766 mm
30.1 in.
At ground level - bucket level (F)
1491 mm
50.7 in.

Bucket angle

Dump angle, degrees (E)
49.3 degree (angle)
Rollback angle, degrees (G)
23.8 degree (angle)
Dump angle, ground
138 degree (angle)

Cycle times

Loader raise, seconds
3.6 seconds
Loader lower, seconds
2.1 seconds
Bucket dump, seconds
3.0 / 1.2 (with regen) seconds
Bucket rollback, seconds
1.8 seconds

Date collected